Phone Case - Apple

Très bon produit et surtout pratique…👍

passt perfekt

The fase is oké, jam happy to yous it

Iets zwaarder dan een ‘gewoon’ iphone hoesje maar daardoor voelt het wat meer solide aan. Past perfect op de stem mount en zit muurvast. Ik ben er blij mee!

Technisch ok, hätte gerne eine Plastikabdeckung bzw. Schutzschiebeelement für Kameralinsen

Het was eventjes ombouwen van het oude naar het nieuwe systeem maar het is gelukt.
Ben er blij mee .

Hatte die Handy Hülle seit etwa 3 Monaten und halbe sie nur am Wochenende benutzt und der Verschleiß ist da schon echt stark und heute nach drei Monaten ist sie in Einzelteilen zersprungen also für 40 Euro kann man schon eine bessere Qualität ertwarten

In 1 jr tijd aan m’n derde iPhone hoesje toe. De eerste keer viel de rubberen bescherming van de knopjes aan de zijkant eraf, bij de tweede was de achterzijde verdraaid waardoor het hoesje niet meer op een houder geklikt kan worden. Ik schaf nu een derde aan en als die dezelfde slechte kwaliteit heeft stap ik over op een ander merk.

Passt perfekt

The cares are horrible. Stiff plastic. The connection part between that touches the mount somehow ripped. Now it does stay. It’s a shame the mounts themselves are great. But the cases? Not so much. Yikes not safe.

Lieferschein 13289199305078

Grüezi
Habe mit obiger Lieferung das bestellte Case erhalten.
Jetzt habe ich das Problem, dass es nicht auf die Halterung passt😩.
Habt ihr ein neues Zwischenstück mit dem neuen Typ. Und könnt ihr mir das bitte an die selbe Adresse senden.

Vielen Dank
Gruess Thomas Ott
Stationsstrasse 42
8542 Wiesendangen

[****]

Reeds mijn 3de case en nog altijd zeer tevreden. Deze case is met MacSafe en voelt dunner aan, daardoor gebruik ik het dagelijks, top.

Als je de telefooncase een paar keer van de houder haalt dan verdraait je bevestiging op je hoesje en kan je m niet meer gebruiken. Slechte kwaliteit

Het bevestigingsmechanisme van het hoesje gaat heel snel kapot. Het middelste stuk zit dan scheef. De eerste keer kon ik hem nog terug duwen maar de tweede keer met geen mogelijkheid meer. Nu stond ik net midden in de nacht op een zandpad in een bos in litouwen zonder navigatie op mn motor. Reed bijna rusland in. Mooi avontuur dat wel

Bonjour
Coque de très bonne qualité, super solide.
Je trouve juste que le son du haut parleur téléphone à l’oreille est atténué par la coque.
J’ai aussi commandé en même temps un support de tableau de bord à coller, celui est bien, mais il se décolle par forte chaleur.

I am very sorry to say but the best extreme protection you'll get from any 50 euro extreme case with the separate adhesive mount glued to the back of the case.
1. There is room between de plastic and the phone.
2. Plastic is a non starter.
3. There are patterns visible in the plastic. The screen is never as clear as glass. Hence plastic is a non-starter.
3. The plastic front reflects like crazy. Under the wrong angle, you'll have to put the phone in your pocket because the sun will blind you.
4. The plastic front dissolves over time. Rain, sun, sweat, chemicals from the road when riding in the rain will peel off the top layer and it becomes unusable.
I have received a new one but point 1 and 3 were immediately putting me off.
SP-Connect, if you read this, PLEASE look at any 50€ extreme case from the competition. Their fit is absolutely flawless, the front is glass. But... They lack the connector. So, you can easily manufacture the perfect case for a lot less but for some reason you just don' want to. At some point the value of the connection becomes subordinate to the value of the case, or the competition takes you out of the game.
It doesn't look as pretty but for now the best solution for me is the glued-on connector to my sub case. As soon as you introduce what is entirely possible, I'll be the first to buy one !

Zit lekker stevig op het stuur. Ik wil ook tijdens fietsen de telefoon er af kunnen halen en dat lukt. Even de routine vinden.
Stevige case die perfect om mijn iPhone 15 pro zit.

A huge disappointment – basically nothing works as it should.

I'm so disappointed with this product that I actually felt the need to write a review.

- After only about one month, the connector on the case broke. The mount can no longer be attached, making the case completely unusable. I'm now forced to look for an alternative.
- The mounting system is also poorly designed. The plastic locking mechanism for attaching it to the handlebar is too soft and strips when tightened. As a result, the mount cannot be secured properly and the phone is not held firmly.
- The case itself is badly designed. It interferes with several sensors on the iPhone 17e, including the camera, Face ID, and the proximity sensor. During phone calls, the screen often stays black because the phone thinks it's being held to your ear, making it impossible to use. - - On top of that, the sides of the case are so high that the edges of the touchscreen are difficult to operate.
Putting the two halves of the case together requires an unreasonable amount of force, yet they still don't close properly and leave visible gaps. It honestly feels like you're more likely to damage your phone than protect it.
- The SP Connect glass screen protector I purchased at the same time develops permanent air bubbles because of the case. It's astonishing that two products from the same manufacturer are not even compatible with each other.

To be honest, almost nothing about this case and mounting system works the way it should. The design, build quality, and functionality all have serious flaws. It's genuinely surprising that a product of this quality made it to market.

For a case costing around €80, I expected a premium, durable, and well-engineered product. Instead, I received an unfinished design with multiple fundamental defects.

A huge disappointment – basically nothing works as it should.

I'm so disappointed with this product that I actually felt the need to write a review.

- After only about one month, the connector on the case broke. The mount can no longer be attached, making the case completely unusable. I'm now forced to look for an alternative.
- The mounting system is also poorly designed. The plastic locking mechanism for attaching it to the handlebar is too soft and strips when tightened. As a result, the mount cannot be secured properly and the phone is not held firmly.
- The case itself is badly designed. It interferes with several sensors on the iPhone 17e, including the camera, Face ID, and the proximity sensor. During phone calls, the screen often stays black because the phone thinks it's being held to your ear, making it impossible to use. On top of that, the sides of the case are so high that the edges of the touchscreen are difficult to operate.
- Putting the two halves of the case together requires an unreasonable amount of force, yet they still don't close properly and leave visible gaps. It honestly feels like you're more likely to damage your phone than protect it.
- The SP Connect glass screen protector I purchased at the same time develops permanent air bubbles because of the case. It's astonishing that two products from the same manufacturer are not even compatible with each other.

To be honest, almost nothing about this case and mounting system works the way it should. The design, build quality, and functionality all have serious flaws. It's genuinely surprising that a product of this quality made it to market.

For a case costing around €80, I expected a premium, durable, and well-engineered product. Instead, I received an unfinished design with multiple fundamental defects.